Lightgogo kit

Programmable Smart Lighting kits 40 to 60 Watts

40, 60 watts

3000K/4000K/5000K

5 Years Warranty

Calculated  L80>100,000h @ Ta 25°C

Why Lightgogo kit ?

World’s first motion detectable classic outdoor lanterns. Lightgogo kit is LED post top light, offers the world’s first motion detectable, programmable, smart dimming, energy efficiency, and together with the quality of light for classic outdoor lanterns.

Built with full smart features. Lightgogo kit has all its smart features of Lightgogo 1’s smart solution, such as the unique 10-period programmable, human microwave sensing functions. And it's sensing delay time settable based on each period’s control.

Improved optical system for better energy saving. The optical system provides improved horizontal and vertical uniformity. Reduced glare and improved lighting control.

ANETHIC’s unique optical technology effectively aims the light where needed. This smart post-top lighting kit can yield up to a 70- percent reduction in system energy, compared with standard HID systems.

Longer lifespan, lower expenses.This reliable system operates well in cold temperatures, and offers more than 15 years of service life, reducing maintenance frequency and expenses, based on a rated 100,000-hour life and 12 hours of operation per day.

Lighting features

Programmable + Smart dimming + Motion sensor + Delay time settable

  • The world’s first smart solution for classic outdoor lanterns, with functions of motion detachable, programmable, and smart dimming built-in.
  • Unique 10-period programmable load power based on each period’s control.
  • Remote controller’s wireless communication, allowing for setting, reading parameters, reading status, etc.
  • Extensible to IoT remote communication monitoring functions.

180lm/w + Up to 70% super energy saving Kits

  • Super high-efficiency up to 185LM/W, more than 15 years of service life.
  • 70 CRI at 3000K, 4000K, and 5000K typical.
  • Super energy saving kits, up to 70-percent reduction in system energy.

Design features

( Housing )

1. Smart controller

10-period programmable smart dimming LED driver

2. LED module

Super High efficiency LEDs Module up to 180lm/w

3. LED driver

Constant voltage power supply with surge protection 6KV and additional separate secondary SPD 10KV

4. Motion sensor

Microwave motion detection sensor

Design features

( Kit )

1. Smart controller

10-period programmable smart dimming LED driver

2. LED driver

Constant voltage power supply with surge protection 6KV and additional separate secondary SPD 10KV

Lightgogo kit is LED post top light, offers the world’s first motion detectable, programmable, smart dimming, energy efficiency, and together with the quality of light for classic outdoor lanterns.

Applications

  • Local Roadways
  • Parks and Pathways
  • Antique Streetscapes
  • University and Business Campuses

Product specification

Programming settings by remote controller

10-period power setting table

Key functions of remote controller

Send information…

  1. Determine the working time, from 0 seconds to 60 minutes after motion detection, check it with code no. 2 “S-D-Time”.
  2. Setup the load power according to request, with code no.12 “LED-Cur”.
  3. Design your very personal and professional settings, with each period’s working time, power before and after motion detection, find code no. 14 “Load Pow Set” and press to enter the load parameters setting interface.

Receive parameters and check the working status…

  1. To receive and check the parameters have sent, and make sure things are all right.
  2. Check the load info. such as working current, voltage, and power, etc.
  3. Find out the total working time in the past few days, such as totally sensing hours, total working hours, totally working days etc. That helps to make a better decision for better parameter settings.

To simply test your lamp…

  1. By pressing the “Test” key of the remote controller, to send a test command to the lamp.  
  2. The test powers are 100%, 70%, 50%, and 30% in turn.

Steps to run a remote controller

Step 1:  Press any key to turn on the remote controller device.

Step 2:  Determine all your parameters in main menu.

Step 3:  Enter the load parameters setting interface, to have your full working time and power settings.

Step 4:  Find the “Send” key, then press it to send parameters to the smart LED street light, and it's done.

Ordering information

Packaging information