Lightgogo 5

All-in-one solar garden lights

‍

Hybrid 60 Watts, MPPT 30 Watts

3000K/4000K/5000K

5 Years Warranty

Calculated L80>100,000h @ Ta 25°C

‍

Download full Datasheet File

Why Lightgogo 5 ?

Smooth and all-in-one design, combined perfectly with Nature. Lightgogo 5 all-in-one solar garden lights are decorative light sources. Same like the previous model Lightgogo 4, It combined with 3 systems 1) Solar power self-generating system; 2) Battery rechargeable system; 3)And high-efficient LED lighting system.

Smart high-efficient but non-stop lighting. Its built-in sensors receive internal power status and external environment changes in real time, so to effectively manage lighting and brightness to achieve the purpose of energy saving and long-lasting lighting.

Solar and Grid Hybrid solution to be more Secure. Lightgogo 5 integrated with a Solar and Grid Hybrid solution for 60 Watts model. System works on solar for priority and automatically switch to Mains power (100-277Vac high range voltage) when battery is low. The hybrid solution makes it credible and no risks where has high illumination requirement but with long rainy & snow seasons in Northern countries.

Lightgogo 5 is not only a decorative garden light, but also a useful platform. With its smart features of Hybrid, MPPT, easy Programmable, smart Dimming, Mention Sensing, super High-efficiency,All-In-One unit, all night Long Lighting, etc... All its functions are optional and customizable. Extensible to IoT remote communication monitoring functions. More and more advanced functions and extra devices could be integrated too.

Lighting features

‍

All-in-one unit + Hybrid + Programmable + Motion sensing

Smooth and all-in-one design, combine perfectly with the nature.
Solar and grid(100-277Vac) hybrid solution, makes it credible and no risks where has high illumination requirement but with long rainy & snow seasons in Northern countries.
Built-in microwave motion sensor, makes the lamp sensible, and sensing delay time settable.

‍

180lm/w + Smart dimming + Remote Control + IoT extensible

Super high-efficiency up to 180lm/w, more than 15 years of service life.
Unique 10-period programmable load power, based on each period’s control.
Remote controller’s wireless communication, allowing for setting, reading parameters, reading status, etc. • Extensible to IoT remote communication monitoring functions.

Design features

‍

1. Housing

Pure aluminum housing

2. LED module

Super High-efficiency LEDs Module, 24 pieces Lumileds 5050 LEDs, up to 185lm/w lamp output

3. LiFePO4 battery

LiFePO4 Battery with built-in protection system, super long lifespan

4. Smart controller

10-period programmable smart dimming LED driver

5. Power Supply

Constant voltage power supply with surge protection 6KV and additional separate secondary SPD 10KV ( for hybrid system only)

6. Solar Panel

Mono type Solar Panel, anti-dust and self-cleaning coating. 23% efficiency. 25 years lifespan

7. Motion Sensor

Microwave motion detection sensor

8. Lamp Bracket

Stainless steel bracket thickness 3 mm to bear the pressure of 150 kgs

9. Pole Adaptor

Pole adaptor with Vertical and Horizontal 0-90 degree of adjustment for leveling. Integral die cast mounting pipe stop. Adjustable for 40-60mm diameter mounting pipe

Smooth and all-in-one design, combined perfectly with nature, Lightgogo 5 all-in-one solar garden lights are decorative light sources.

Lightgogo 5 family

‍

The Lightgogo 5 family includes 2 models of solar street lights, mppt version 30 watts, and hybrid version 60 watts.

Applications

‍

Street lighting
Road lighting
Housing estate
Outdoor parking lots
Garden
Parks
Yard

download full Datasheet file

Product specification

‍

Programming settings by remote controller

‍

10-period power setting table

‍

Key functions of remote controller

‍

Send information…

Determine the working time, from 0 seconds to 60 minutes after motion detection, check it with code no. 2 “S-D-Time”.
Setup the load power according to request, with code no.12 “LED-Cur”.
Design your very personal and professional settings, with each period’s working time, power before and after motion detection, find code no. 14 “Load Pow Set” and press to enter the load parameters setting interface.

Receive parameters and check the working status…

To receive and check the parameters have sent, and make sure things are all right.
Check the load info. such as working current, voltage, and power, etc.
Find out the total working time in the past few days, such as totally sensing hours, total working hours, totally working days etc. That helps to make a better decision for better parameter settings.

To simply test your lamp…